Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter

Cellflex 1/2 LCF zwart Coaxkabel, per 10 meter Bekijk groter

Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter

DMR Electronics

07-0100-0010

Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter. The low attenuation of CELLFLEX® coaxial cable results in highly efficient signal transfer in your RF system

Bij het kopen van dit product krijgt u in totaal 4 Loyaliteit punten. Uw winkelwagen bevat een totaal aan 4 Loyaliteit punten die omgezet kunnen worden in een waardebon van € 0,80.


€ 89,99

Korting op je Bestelling Korting op je Bestelling
Gratis verzenden Gratis verzenden tot 10 KG
Volume korting Volume korting
Bonus systeem Bonus systeem
Veilig betalen Veilig betalen
Niet goed geld terug Niet goed geld terug
Trustpilot Trustpilot

Volumekorting

Aantal Korting U bespaart
2 2% Tot € 3,60
4 4% Tot € 14,40
6 6% Tot € 32,40
8 8% Tot € 57,59
10 10% Tot € 89,99

Productinformatie Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter

Cellflex Coax Kabel 1/2 LCF zwart


Low Attenuation Cellflex Coax Kabel 
The low attenuation of CELLFLEX® coaxial cable results in highly efficient signal transfer
in your RF system.

Complete Shielding
The solid outer conductor of CELLFLEX® coaxial cable creates a continuous RFI/EMI shield
that minimizes system interference.

Low VSWR
Special low VSWR versions of CELLFLEX® coaxial cables contribute to low system noise.

Outstanding Intermodulation Performance
CELLFLEX® coaxial cables solid inner and outer conductors virtually eliminate intermods.
Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.

High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric
materials, CELLFLEX® cable provides safe long term operating life at high transmit power levels.

Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas,
wireless cellular, PCS and ESMR base stations, cabling of antenna arrays,
and radio equipment interconnects.

 

Technical Facts:


Structure
Inner Conductor: Copper-Clad Aluminum Wire [ mm (in) ] 3.56 (0.14)
Dielectric: Foam Polyethylene [ mm (in) ] 9.3 (0.366)
Outer Conductor: Corrugated Copper [ mm (in) ] 12.3 (0.48)
Jacket: Polyethylene, PE [ mm (in) ] 13.75 (0.54)
Mechanical Properties
Weight, approximately [ kg/m (lb/ft) ] 0.17 (0.11)
Minimum bending radius, single bending [ mm (in) ]  
Minimum bending radius, repeated bending [ mm (in) ] 32 (1.3)
Bending moment [ Nm (lb-ft) ] 1.8 (1.33)
Max. tensile force [ N (lb) ] 650 (146)
Recommended / maximum clamp spacing [ m (ft) ] 0.30 / 0.30 (1.00 / 1.00)
Electrical Properties
Characteristic impedance [ Ω ] 50 +/- 1
Relative propagation velocity [ % ] 77
Capacitance [ pF/m (pF/ft) ] 86.0 (26.0)
Inductance [ µH/m (µH/ft) ] 0.215 (0.066)
Max. operating frequency [ GHz ] 10.6
Jacket spark test RMS [ V ] 5000
Peak power rating [ kW ] 24.0
RF Peak voltage rating [ V ] 1550
DC-resistance inner conductor [ Ω/km (Ω/1000ft) ] 2.9 (0.88)
DC-resistance outer conductor [ Ω/km (Ω/1000ft) ] 4.5 (1.37)
Recommended Temperature Range
Storage temperature [ °C (°F) ] -70 to +85 (-94 to +185)
Installation temperature [ °C (°F) ] -40 to +60 (-40 to +140)
Operation temperature [ °C (°F) ] -50 to +85 (-58 to +185)

 

**note: het aantal welke u selecteert is gelijk aan x 10 meter, ( aantal 2 = 20 meter, aantal 5 = 50 meter). 

U ontvangt de volledige lengte aan één stuk.