hohe Effizienz 5 kW FM Zender EM 5000 He Digital | DMR -Elektronik

    5KW FM Zender, HIGH EFFICIENCY 5KW FM ZENDER EM 5000 HE DIG Vergrößern

    hohe Effizienz 5 kW FM Zender EM 5000 He Digital | DMR -Elektronik

    EM 5000-DIG

    Der 5 -kW -FM -Sender EM 5000 He Dig Plus wurde vom OMB -Entwicklungszentrum für hocheffiziente Sender erstellt. Es besteht aus dem hohen Effizienz von 5 kW -Verstärker, FMA 5000 HE mit 72% Effizienz und dem EM 25 Dig Plus, einem 25 -W -FM -Sender. Der hohe Effizienz von 5 kW -Verstärker hat einen ungefähren Verbrauch von 6600 VA bei 230 VAC. Daher zahlt es sich in kurzer Zeit aufgrund seines niedrigen Verbrauchs aus. Dieser 5 -kW -FM -Sender ist auch in der Dual -Laufwerk -Version

    erhältlich

    Achtung: Letzte verfügbare Teile!

    Sammeln Sie mit dem Kauf dieses Artikels bis zu 1268 Treuepunkte. Ihr Warenkorb hat insgesamt 1268 Treuepunkte die umgewandelt werden können in einen Gutschein im Wert von € 253,60.


    € 25.364,99

    Rabatt auf Ihre Bestellung Rabatt auf Ihre Bestellung
    Kostenloser Versand Kostenloser Versand in NL
    Volumenrabatt Volumenrabatt
    Bonus-System Bonus-System
    Sichere Zahlung Sichere Zahlung
    Geld-zurück-Garantie Geld-zurück-Garantie
    Trustpilot Trustpilot

    Mengenrabatt

    Menge Rabatt Sie sparen
    2 2% Bis zu € 1.014,60
    4 4% Bis zu € 4.058,40
    6 6% Bis zu € 9.131,40
    8 8% Bis zu € 16.233,59
    10 10% Bis zu € 25.364,99

    Mehr Infos hohe Effizienz 5 kW FM Zender EM 5000 He Digital | DMR -Elektronik

    Product Discription:

    MAIN ADVANTAGES OF THE EM 5000 HE DIG PLUS FM TRANSMITTER MANUFACTURED BY OMB:

    •  AC Efficiency: 72% (typical value). RF Efficiency RF: 84% (typical value)
    • 6 amplifying modules of 1000W with MOSFET technology
    • 3 independent switching power supplies connected in parallel so if there is a failure in any of them the equipment maintains its operation
    • TFT screen and touch keyboard for the control and visualization of operational parameters.
    • Memory registration of events
    • Control of the speed of cooling fans depending on the temperature at the power modules for optimizing power consumption and decreasing acoustic contamination
    • Advanced protection against load mismatches without interrupting the transmission and ultra-fast protection in case of excessive reflected power and input power
    • Analog telemetry, digital RS232 remote control and telemetry, remote control by opened/closed contacts
    • Low pass filter, EMI filters and internal single-phase transient suppressor
    • Automatic power reduction at night if the amplifier is combined with the EM 25 DIG PLUS
    • Automatic power reduction in case of high temperature, the equipment returns automatically to its rated power value when the temperature reaches back an average value
    • Automatic power reduction in case of failure of one of the power supplies and in case of excessive reflected power.
    • Automatic voltage control for efficiency optimization
    GENERAL CHARACTERISTICS

     

    AMPLIFIER FMA 5000 HE
    FREQUENCY RANGE 87.5-108MHz
    INPUT RETURN LOSS -20dB
    INPUT POWER <25W
    OUTPUT POWER 5KW nominal, manual and automatic adjustable
    POWER GAIN >21.3dB minimum
    TOTAL EFFICIENCY >73% typical
    RF EFFICIENCY 84% typical
    COOLING Forced air, speed control of fans
    HARMONICS LEVEL <-82dBc
    INPUT/OUTPUT IMPEDANCE 50Ω
    RF INPUT CONNECTOR N(F)
    RF OUTPUT CONNECTOR EIA 7/8" or EIA 1+5/8" (under request)
    RF MONITOR CONNECTOR BNC(F)
    POWER SUPPLY 230VAC single phase, 230-380VAC three phase
    CONSUMPTION 6600VA (@5000W output power)
    PROTECTIONS Reflected power, forward power, overdrive, and overcurrent in power modules. Smart temperature protection. Ultra-fast protection against reflected and input power. Real time registration of events. Exciter’s inhibition
    TELEMETRY AND REMOTE CONTROL Analog telemetry (direct and reflected power measurements). Digital telemetry and remote control RS232. Remote control by opened/closed contacts
    OPERATION TEMPERATURE -5 to +40°C
    WEIGHT 55Kg approx. (without rack)
    DIMENSIONS 5 standard rack units of 19" (height), 850mm (depth)

     

    EXCITER EM 25 DIG PLUS
    FREQUENCY RANGE 87.5-108MHz
    FM MODULATION 75KHz (adjustable) peak deviation. Mono 180kF3E and Stereo 256kF3E
    AUDIO/MPX INPUT LEVEL -3.5 @ +12.5dBm @ 75KHz deviation
    AUDIO INPUT CONNECTORS XLR(F)
    AUXILIARY CHANNEL (RDS/SCA) INPUT LEVEL 7.5KHz deviation: -12.5 to 3.5dBm and 2KHz deviation: -24 to -8dBm
    AUX. CHANNEL INPUT IMPEDANCE 10kOhm
    MODULATION DISTORTION 7.5Khz deviation: <0.05%, 0.02% typical; 2KHz deviation: <0.2%, 0.05% typical
    S/N MONO RATIO 30 to 20000Hz: >76dB, 86dB typical, CCIR: >75dB, 81dB typical

     

    Technical specifications:


     

    S/N STEREO RATIO 30 to 20000Hz: >72dB, 77dB typical, CCIR: >68dB, 72dB typical
    AUDIO CHANNELS BANDWIDTH 30 to 15000Hz ±0.1dB
    PRE-EMPHASIS TIME CONSTANT Selectable, 25/50/75 microseconds
    RF NOMINAL OUTPUT POWER 25W
    TUNING STEPS OF TRANSMITTER 10/100KHz
    ALC OUTPUT POWER STABILITY ±3%
    SPURIOUS AND HARMONIC EMISSIONS <80dBc
    RF OUTPUT IMPEDANCE 50Ω
    RF INPUT POWER CONNECTOR N
    RF SAMPLING CONNECTOR BNC
    POWER SUPPLY 110-230Vac ±15% 50-60Hz
    OPERATION TEMPERATURE RANGE 0 to 40°C recommended, -10 to 55°C max.
    RELATIVE HUMIDITY Up to 95% without condensation
    DIMENSIONS 484x300x90mm, 2 standard rack units of 19"
    WEIGHT 7Kg