Product discription:
TVMAX 6010V+ 10W VHF LO+ HI TV Zender + basic (3-key) LCD, Our new 10W VHF TV transmitter is your ticket into the world of TV. With support for remote directional coupler and RF power limit so you can build 100W, 200W, 500W or stronger TV transmitter.
- New LCD displays with rotary encoder and larger 4x16 type now supported
- Audio level displayed on the LCD
- Power level even over entire frequency band
- Improved on-board DCDC (works off 20-48V DC)
- LC video and audio filter for better picture/sound quality
- DIGIAMP interface for reading power, SWR, temp, current and voltage and for displaying it all on the LCD module
- Adjustable power limit (ALC) lets you limit amplifier output power, this is practical for driving big amplifiers (same technology as used in MAXPRO FM exciters)
- Power limit jumpers let you limit output power of exciter, this is practical for driving big amplifiers (1W, 2W, 4W, 8W)
- Slow power up ramp
- Power output equalized across the band
- New menu system, taken from our FM line (8015)
Technical specs:
- Powered from 20-48V (requires 48V for full power)
- DSB AM modulation, universal all audio and TV standards
- Fits our new 19" 1H rack
- Built-in CPU for controlling and monitoring
- PC remote control via RS232, USB or Ethernet (requires IO board or ethernet expansion board)
- It can now read POWER and SWR from external directional coupler (DIGIAMP), it can also monitor amplifier temperature, voltage, current
- Adjustable TV channel (via LCD module with up/down keys)
- Easily adjustable TV and sound standard (via LCD module)
- Built-in test signal generator
- Supports all world TV standards: All PAL versions, SECAM, NTSC
- TV Channels: All VHF HIGH (175-225MHz in 125KHz steps)
- TV Channels: All VHF LOW (55-88MHz in 125KHz steps)
- SWR and TEMP protection
- Stereo sound possible with plug-in board (NTSC)
- Friendly user interface
- Output power: 10W typ, adjustable from 0 to Pmax via LCD display,
- Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
- Output connector BNC female ( rear panel )
- Frequency range: TV VHF band
- Audio connectors: RCA (cinch)
- Audio level: 1Vpp
- Video level: 1Vpp
- Audio input impedance: 10K resistive, unbalanced
- Pre-emphasis 50 or 75usec
- Regulated power supply: DC 20-48V/2A (more power at higher voltage)
- Weight: 0.8kg
- Dimensions: 100x125mm, same as TVMAX 5000+
- A fan is needed at all times (blowing across the board)
