TVMAX5050U Transmitter V.2 UHF 7W in 19inch rack

View larger

PCS-Electronics

Model

Condition New

TVMAX 5050U+ 7W UHF TV TRANSMITTER in 19 inch Rack

More details

This product is no longer in stock

By buying this product you can collect up to 34 loyalty points. Your cart will total 34 loyalty points that can be converted into a voucher of € 6,80.

Print your Product page

Volume discounts - TVMAX5050U Transmitter V.2 UHF 7W in 19inch rack

Quantity	Discount	You Save
2	2%	Up to € 18,02
3	3%	Up to € 40,54
4	4%	Up to € 72,06
5	10%	Up to € 225,20
10	15%	Up to € 675,60

More info

TVMAX 5050U+ 7W UHF TV TRANSMITTER in 19 inch Rack

Product Discription:

TVMAX3000+ was a great low-cost TV transmitter, but it had a few drawbacks. This is why we decided to bring out a new model and now it is finally here! Our new up to 7W UHF TV transmitter is your ticket into the world of TV. Now with support for remote directional coupler and RF power limit so you can build 100W, 200W, 500W or stronger TV transmitter. Build your own TV studio and broadcast your own TV program! Transmit movies from your PC to your living room, re-transmit the TV program you've never been able to receive in your valley, run a college TV station, cover rural areas of Africa with TV signal from satellite stations, run a hotel cable system info pages or just have fun... this unit will keep you busy during the cold winter evenings and is sure to provide lots of fun for many months to come!
Unit is available as a populated and tested board or a rack-mounted ready-to-use transmitter. Rack mounted unit runs from 50V DC from mains power adapter. Optional stereo encoder board plugs into the main transmitter board to provide stereo sound and DSP processing for NTSC. Up to 7W of output power offers from several hundred meters up to about 8km of range depending on antenna type used on transmitting and receiving side. High-gain yagis on both sides might offer even more range in favorable conditions.
Unit is rugged and comes with SWR protection, made for 24/7/365 operation. Each unit has a wide-angle high contrast back-lit LCD display. Output power and channel can now be adjusted via LCD module.

Technical Facts:

Powered from 50V
DSB AM modulation, universal audio and TV standards
Fits our new 19" 1H rack
Built-in CPU for controlling and monitoring
PC remote control via RS232, USB or Ethernet (requires IO board or ethernet expansion board)
It can now read POWER and SWR from external directional coupler (DIGIAMP mini), it can also monitor amplifier temperature
Adjustable TV channel (via LCD module with up/down keys)
Easily adjustable TV and sound standard (via LCD module)
Built-in test signal generator
Supports all world TV standards: All PAL versions, SECAM, NTSC
EU TV Channels: channel 21 to channel 69 (EU)
USA TV Channels: channel 14 to 69
HAM TV Channels: 421.25, 426.25, 427.25, 434.00, 434.125, 434.25, 434.375, 439.25 and 444.25MHz
Above channel 35 output power starts dropping and is below 1W at channel 69, still the results are much better than with TVMAX 3000!
SWR protection
Stereo sound possible with plug-in board (NTSC)
Friendly user interface
Output power: 7.5-8W typ. (ch21), 1W (ch50), adjustable from 0 to Pmax via LCD display
Output impedance 50 Unbalanced, VSWR less than 2:1 for full output
Output connector BNC female ( rear panel )
Frequency range: TV UHF band
Audio connectors: RCA (cinch)
Audio level: 1Vpp
Video level: 1Vpp
Audio input impedance: 10K resistive, unbalanced
Pre-emphasis 50 or 75usec
RF Spurious: -80 dBc @ +- 1MHz min. out of carrier
RF Harmonics: -50 dBc Standard
Power supply: 110-240V/50-60Hz, universal, PC style mains cable needed (not included)
Rack size: standard 1H
Weight 2kg, shipping shows more due to size!