Op DMR-Electronics maken wij gebruik van cookies en andere technologieën, als u verder gaat accepteerd u de cookies close
DR 800W FM LOW PASS FILTER with DIGIAMP Bekijk groter

DR 800 - 1000W FM LOW PASS FILTER with DIGIAMP

800w-LPF

Nieuw

800-1000W Low Pass filter with easy connect DIGIAMP system, built for our MAX PRO 3000+ and 4000+ series exciters. The DIGIAMP interconnect system enables easy integration into a FM transmitter

Meer details


✓ Scherpe prijs ✓ Veilig betalen
✓ Gratis verzenden ✓ Niet goed geld terug
✓ Volume korting ✓ Korting sparen
✓ Groot assortiment ✓ QShops Keurmerk

Bij het kopen - bestellen van dit product krijgt u in totaal 7 Loyaliteit punten. Uw winkelwagen bevat een totaal aan 7 Loyaliteit punten die omgezet kunnen worden in een waardebon van EUR 1,40.


EUR 149,99 incl. BTW

Volumekorting

Aantal Prijs U bespaart
5 EUR 143,99 Tot EUR 30,00
10 EUR 136,49 Tot EUR 134,99

Meer informatie

800-1000W Low Pass filter with easy connect DIGIAMP system include flatcable


Product Discription:

800-1000W Low Pass filter with easy connect DIGIAMP system, built for our MAX PRO 3000+ and 4000+ series exciters. The DIGIAMP interconnect system enables easy integration into a FM transmitter.

All it takes is one flat cable (DIGIAMP). This connection enables measurement of SWR and Power, amplifier supply voltage and current and amplifier temperature. It also provides SWR protection and automatic output level limiting. Of course it also includes low pass filter as RF amplifiers produce harmonics at even multiples of fundamental frequency.

If your harmonics fall on or near a TV channel or Maritime frequency you could cause severe interference to that channel. The most common cause of fines from federal agencies is due to TVI or other interference from your transmitter which generates a complaint. Use of the nicely priced PCS 5000 low pass filter is the best method of eliminating this kind of interference. The low insertion loss of the Low Pass filters makes them well suited for use at power levels as low as 10 watts on up to 800-1000 watts!

These units are constructed using high-quality 1KV mica capacitors and silver-plated coil wire! SWR and PWR voltages are provided for power/swr measuring purpose. Two calibrating trimmers are provided as well to adjust correct power and swr measurment accuracy. SWR protection circuitry is provided as well and its sensitivity can be adjusted with one of the trimmers (requires MAX PRO 3000 or MAX PRO 4025). When reflected power (SWR) reaches certain level swr protection output decreases RF output. ALC automatic level control also requires MAX PRO 4025 or MAX PRO 3000+.

A perfect companion for the pallet amplifiers, offering output filtering and swr protection!

 

Techincal Facts:
  • Input/Output Impedance: 50 Ohms
  • Insertion Loss: 0.3dB typ.
  • Power handling: 800-1000W with ventilation
  • Typical stop-band attenuation: >50dB
  • Cut-Off Frequency: 120 MHz (-3dB down)
  • Input/Output Connectors: solder pads for coax
  • Duty Cycle Rated for continuous operation with forced air cooling
     

 

 

Recensies

Schrijf uw recensie

DR 800 - 1000W FM LOW PASS FILTER with DIGIAMP

DR 800 - 1000W FM LOW PASS FILTER with DIGIAMP

800-1000W Low Pass filter with easy connect DIGIAMP system, built for our MAX PRO 3000+ and 4000+ series exciters. The DIGIAMP interconnect system enables easy integration into a FM transmitter

Schrijf uw recensie

8 Andere producten in dezelfde categorie: