2KW FM Zender, EM 2000 HE DIG PLUS OMB

2KW FM Zender, EM 2000 HE DIG PLUS OMB Bekijk groter

2KW FM Zender, EM 2000 HE DIG PLUS OMB

OMB

EM 2000 HE D

The 2KW FM transmitter, EM 2000 HE DIG PLUS, has been created by the OMB center of development for high efficiency transmitters. It consists on the high efficiency 2KW amplifier, FMA 2000 HE, with >73% efficiency and the EM 25 DIG PLUS, a 25W FM transmitter. The high efficiency 2KW amplifier has an approximate consumption of 2600VA at 230Vac, so it pays for itself in a short period of time due to its low consumption. This 2KW FM transmitter is also available in Dual Drive version

Let op: laatste item(s) op voorraad!

Bij het kopen van dit product krijgt u in totaal 549 Loyaliteit punten. Uw winkelwagen bevat een totaal aan 549 Loyaliteit punten die omgezet kunnen worden in een waardebon van € 109,80.


€ 10.999,99

Korting op je Bestelling Korting op je Bestelling
Gratis verzenden Gratis verzenden tot 10 KG
Volume korting Volume korting
Bonus systeem Bonus systeem
Veilig betalen Veilig betalen
Niet goed geld terug Niet goed geld terug
Trustpilot Trustpilot

Volumekorting

Aantal Korting U bespaart
2 2% Tot € 440,00
4 4% Tot € 1.760,00
6 6% Tot € 3.960,00
8 8% Tot € 7.039,99
10 10% Tot € 10.999,99

Productinformatie 2KW FM Zender, EM 2000 HE DIG PLUS OMB

 

Product Discription:

MAIN FEATURES OF THE 2KW FM DIGITAL TRANSMITTER MANUFACTURED BY OMB:
 

  • Typical AC efficiency >73% and typical RF efficiency of 84%.
  • Two amplifying modules of 1000W with MOSFET technology.
  • Two independent switching power supplies connected in parallel to maintain the equipment working in case any of them fails.
  • TFT screen and touch keyboard to control and to visualize operation parameters.
  • Memory recording of events.
  • Speed control of cooling fans according to temperature of power modules so as to optimize consumption and to decrease acoustic contamination.
  • Advanced protection against load mismatches without transmission cuts and fast protection in case of excessive reflected power and/or excessive input power.
  • Analog telemetry, digital remote control and telemetry RS232, remote control by opened/closed contacts
  • Low pass filter, Mains EMI filter and internal single-phase transient suppressor.
  • Automatic power reduction at night when used in combination with the EM 25 DIG PLUS transmitter.
  • Automatic power reduction in case of high temperature, the equipment returns automatically to its rated power value when the temperature reaches back an average value.
  • Automatic power reduction in case of excessive reflected power.
  • Automatic voltage control for efficiency optimization.
  • Power supplies of the amplifier are hot removable and interchangeable.
  • Automatic voltage control for efficiency optimization
     
GENERAL CHARACTERISTICS

CHARACTERISTICS AMPLIFIER FMA 2000 HE HPPS
FREQUENCY RANGE 87.5-108MHz
INPUT RETURN LOSS -20dB
INPUT POWER <15W
OUTPUT POWER 2000W nominal, manual and automatic adjustable
POWER GAIN 19.2dB minimum
TOTAL EFFICIENCY >73% typical
RF EFFICIENCY 84% typical
COOLING Forced air, speed control of fans
HARMONICS LEVEL -80dBc
INPUT/OUTPUT IMPEDANCE 50Ω
RF INPUT CONNECTOR N(F)
RF OUTPUT CONNECTOR 7/16"or EIA 7/8"
RF MONITOR CONNECTOR BNC(F)
POWER SUPPLY 230VAC ±15% → 195 ÷ 265VAC, 50/60Hz
CONSUMPTION 2600VA (@2000W output power)
PROTECTIONS Reflected power, forward power, overdrive, and overcurrent in power modules. Smart temperature protection. Ultra-fast protection against reflected and input power. Real time registration of events. Exciter’s inhibition
TELEMETRY AND REMOTE CONTROL Analog telemetry (direct and reflected power measurements). Digital telemetry and remote control RS232. Remote control by opened/closed contacts
OPERATION TEMPERATURE -5 to +40°C
WEIGHT 20Kg approx. (without rack)
DIMENSIONS 3 standard rack

 

EXCITER EM 25 DIG PLUS
FREQUENCY RANGE 87.5-108MHz
FM MODULATION 75KHz (adjustable) peak deviation. Mono 180kF3E and Stereo 256kF3E
AUDIO/MPX INPUT LEVEL -3.5 @ +12.5dBm @ 75KHz deviation
AUDIO INPUT CONNECTORS XLR(F)
AUXILIARY CHANNEL (RDS/SCA) INPUT LEVEL 7.5KHz deviation: -12.5 to 3.5dBm and 2KHz deviation: -24 to -8dBm
AUX. CHANNEL INPUT IMPEDANCE 10kOhm
MODULATION DISTORTION 7.5Khz deviation: <0.05%, 0.02% typical; 2KHz deviation: <0.2%, 0.05% typical 
S/N MONO RATIO 30 to 20000Hz: >76dB, 86dB typical, CCIR: >75dB, 81dB typical

 

Technical specifications:

 

S/N STEREO RATIO 30 to 20000Hz: >72dB, 77dB typical, CCIR: >68dB, 72dB typical 
AUDIO CHANNELS BANDWIDTH 30 to 15000Hz ±0.1dB
PRE-EMPHASIS TIME CONSTANT Selectable, 25/50/75 microseconds
RF NOMINAL OUTPUT POWER 25W
TUNING STEPS OF TRANSMITTER 10/100KHz
ALC OUTPUT POWER STABILITY ±3%
SPURIOUS AND HARMONIC EMISSIONS <80dBc
RF OUTPUT IMPEDANCE 50Ω
RF INPUT POWER CONNECTOR N
RF SAMPLING CONNECTOR BNC
POWER SUPPLY 110-230Vac ±15% 50-60Hz
OPERATION TEMPERATURE RANGE 0 to 40°C recommended, -10 to 55°C max.
RELATIVE HUMIDITY Up to 95% without condensation
DIMENSIONS 484x300x90mm, 2 standard rack units of 19"
WEIGHT 7Kg