MAXPRO -8015+ 15W FM -Sender - Erreger plus LCD

    MAXPRO -8015+ 15W FM -Sender - Erreger plus LCD

    MaxPro -8015+ 15W FM -Sender -Erreger einschließlich LCD

    Qsonic PLL/VCO, ausgezeichnete Bassantwort, Schnellschloss!

    Die neuen MAX Pro 8015+ FM-Exzits sind fein abgestimmte, optimierte und verbesserte Version von maxPro7015. Sie bringen noch besseres S/N-Verhältnis und MaxLink II-Schnittstelle für die einfache Verdrahtung zum neuen SE8000 DSP+ Stereo-Encoder.

    • RF-Ausgangsleistung: 0 bis 15 Watt, LCD-Stromanpassungsbereich kann ebenfalls auf 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-Vollen, begrenzt sein, das ist erledigt mit einem Jumper (genaue Optionen variieren je nach Modell)
    • Ausgangsstecker: 15 BNC
    • Ausgangsimpedanz: 50 Ohm
    • Frequenzbereich: 87.5-108MHz
    • PLL-Schritte: 50 kHz-500kHz, einstellbar
    • Frequenzstabilität: +/- 20Hz
    • falsche/harmonische Ablehnung: Harmonische: & gt; 50db, falsch: (& gt; 80db)
    • Stromversorgung 15W: 12-15 V/3a oder Autobatterie
    • Stromanschluss: Neues Design mit Plugin mit 2 Schraubenklemmen oder Standard -Fass -Typ
    • quarzsperrte PLL -Frequenzsteuerung
    • Ultra stabil, Ultra -sauberer Ausgang
    • Keine teuren Testgeräte erforderlich
    • Audioleistung: weniger als 0,1% Verzerrung, 20 Hz-75kHz
    • RF -Ausgabe Rugdness: SWR -Schutz
    • Polaritätsschutz, Temperaturschutz
    • Vorabminderung, 50US, 75US oder keine
    • Audioeingangsimpedanz: 10kohm, unausgeglichenes
    • Audioeingangsstufe: 0 dB
    • S/N -Verhältnis: & gt; 90 dB
    • PC -Boardgröße 15W: 100x125 mm
    • Audioverbinder: 2 Stifte und Lötpads, MaxLink II
    • RF Monitor: Lötpads

    Sammeln Sie mit dem Kauf dieses Artikels bis zu 27 Treuepunkte. Ihr Warenkorb hat insgesamt 27 Treuepunkte die umgewandelt werden können in einen Gutschein im Wert von € 5,40.


    € 274,99

    LCD Display 

    • 2x16 LCD with rotary button

    • 4x16 LCD with rotary button

    Stereo 

    • Digital Stereo encoder met Digital inputs

    • Stereo L R

    RDS 

    • RDS encoder daughter board

    • Zonder RDS

    Rabatt auf Ihre Bestellung Rabatt auf Ihre Bestellung
    Kostenloser Versand Kostenloser Versand in NL
    Volumenrabatt Volumenrabatt
    Bonus-System Bonus-System
    Sichere Zahlung Sichere Zahlung
    Geld-zurück-Garantie Geld-zurück-Garantie
    Trustpilot Trustpilot

    Mengenrabatt

    Menge Rabatt Sie sparen
    2 2% Bis zu € 11,00
    4 4% Bis zu € 44,00
    6 6% Bis zu € 99,00
    8 8% Bis zu € 175,99
    10 10% Bis zu € 274,99

    Mehr Infos MAXPRO -8015+ 15W FM -Sender - Erreger plus LCD

    Product discription:


    MAXPRO-8015+ 15W FM transmitter - exciter including LCD

    Qsonic PLL/VCO, excellent bass response, fast lock!

    The new MAX PRO 8015+ FM exciters are fine-tuned, optimized and improved version of MAXPRO7015. They bring even better S/N ratio and MAXLINK II interface for easy no-soldering wiring to the new SE8000 DSP+ stereo encoder. 

    Supports previous MAXLINKI and new MAXLINK II for easy interfacing with the new SE8000 DSP+ without soldering

    • MPX cable no longer needed for connection to new stereo encoders (Such as SE8000 DSP+).
    • VU meter signals wired through MAXLINK II and LCD display flat cable which simplifies wiring considerably
    • Further Improved S/N ratio across the band, designed for maximum spurious signal rejection (>80dBc). Some high-end customers appreciate this feature. Depending on operating frequency dBc can be >95dB down relative to the carrier.
    • Self-resetting electronic PTC fuse (no more pesky fuse replacements).

    What parameters can I change via remote control?
    Its best that you look at the screen capture below. The program may change over time as we make enhancements, we will be adding more features soon!

     

    Technical facts:


    • RF Output Power: 0 to 15 Watts, LCD power adjustment range can also be limited to 0-1W, 0-2W, 0-3W, 0-4W ... 0-15W, 0-full, this is done with a jumper (exact options vary depending on model)
    • Output connector: 15 BNC
    • Output Impedance: 50 Ohms
    • Frequency range: 87.5-108MHz
    • PLL Steps: 50KHz-500KHz, adjustable
    • Frequency stability: +/- 20Hz
    • Spurious/Harmonic rejection: Harmonics: >50dB, Spurious: (>80dB)
    • Power Supply 15W: 12-15V/3A or car battery
    • Power connector: New design with plugin with 2 screw terminals or standard barrel type
    • Quartz Locked PLL Frequency Control
    • Ultra Stable, Ultra Clean Output
    • No Expensive Test Equipment Required
    • Audio performance: Less than 0.1% distortion, 20Hz-75KHz
    • RF output ruggedness: SWR protection
    • Polarity protection, temp protection
    • Pre-emphasis, 50uS, 75uS or none
    • Audio Input Impedance: 10Kohm, unbalanced
    • Audio Input Level: 0 dB 
    • S/N ratio: >90 dB 
    • PC Board Size 15W: 100x125mm
    • Audio connectors: 2 pins and solder pads, MAXLINK II
    • RF monitor: solder pads