Product Discription:
MAIN FEATURES OF THE
3KW FM DIGITAL TRANSMITTER MANUFACTURED BY OMB:
- AC Efficiency: 72% (typical
value). RF Efficiency RF: 84% (typical value)
- 4 amplifying modules of
900W with MOSFET technology
- 3 independent switching
power supplies connected in parallel so if there is a failure in any of them
the equipment maintains its operation
- TFT screen and touch
keyboard for the control and visualization of operational parameters.
- Memory registration of
events
- Control of the speed of
cooling fans depending on the temperature at the power modules for
optimizing power consumption and decreasing acoustic contamination
- Advanced protection
against load mismatches without interrupting the transmission and ultra-fast
protection in case of excessive reflected power and input power
- Analog telemetry, digital
RS232 remote control and telemetry, remote control by opened/closed contacts.
- Low pass filter, EMI
filters and internal single-phase transient suppressor
- Automatic power reduction
at night if the amplifier is combined with the EM 25 DIG PLUS
- Automatic power reduction
in case of high temperature, the equipment returns automatically to its
rated power value when the temperature reaches back an average value
- Automatic power reduction
in case of failure of one of the power supplies and in case of excessive
reflected power.
- Automatic voltage control
for efficiency optimization
GENERAL CHARACTERISTICS
AMPLIFIER FMA 3000 HE |
FREQUENCY RANGE |
87.5-108MHz |
INPUT RETURN LOSS |
-20dB |
INPUT POWER |
<25W |
OUTPUT POWER |
3-3.5KW nominal, manual and automatic adjustable |
POWER GAIN |
>21.3dB minimum |
TOTAL EFFICIENCY |
>73% typical |
RF EFFICIENCY |
84% typical |
COOLING |
Forced air, speed control of fans |
HARMONICS LEVEL |
-82dBc |
INPUT/OUTPUT IMPEDANCE |
50Ω |
RF INPUT CONNECTOR |
N(F) |
RF OUTPUT CONNECTOR |
7/16"or EIA 7/8" (under request) |
RF MONITOR CONNECTOR |
BNC(F) |
POWER SUPPLY |
230VAC ±15% → 195 ÷ 265VAC, 50/60Hz |
CONSUMPTION |
4200VA (@3000W output power) |
PROTECTIONS |
Reflected power, forward power, overdrive, and overcurrent in power
modules. Smart temperature protection. Ultra-fast protection against
reflected and input power. Real time registration of events. Exciters
inhibition |
TELEMETRY AND REMOTE CONTROL |
Analog telemetry (direct and reflected power measurements). Digital
telemetry and remote control RS232. Remote control by opened/closed
contacts |
OPERATION TEMPERATURE |
-5
to +40°C |
WEIGHT |
45Kg approx. (without rack) |
DIMENSIONS |
5
standar |
EXCITER EM 25 DIG PLUS
|
FREQUENCY
RANGE |
87.5-108MHz
|
FM MODULATION
|
75KHz (adjustable)
peak deviation. Mono 180kF3E and Stereo 256kF3E |
AUDIO/MPX
INPUT LEVEL |
-3.5 @ +12.5dBm @
75KHz deviation |
AUDIO INPUT
CONNECTORS |
XLR(F)
|
AUXILIARY
CHANNEL (RDS/SCA) INPUT LEVEL |
7.5KHz deviation:
-12.5 to 3.5dBm and 2KHz deviation: -24 to -8dBm |
AUX. CHANNEL
INPUT IMPEDANCE |
10kOhm
|
MODULATION
DISTORTION |
7.5Khz deviation:
<0.05%, 0.02% typical; 2KHz deviation: <0.2%, 0.05% typical |
S/N MONO RATIO
|
30 to 20000Hz:
>76dB, 86dB typical, CCIR: >75dB, 81dB typical |
Technical specifications:
S/N STEREO
RATIO |
30 to 20000Hz:
>72dB, 77dB typical, CCIR: >68dB, 72dB typical |
AUDIO CHANNELS
BANDWIDTH |
30 to 15000Hz
±0.1dB |
PRE-EMPHASIS
TIME CONSTANT |
Selectable,
25/50/75 microseconds |
RF NOMINAL
OUTPUT POWER |
25W |
TUNING STEPS
OF TRANSMITTER |
10/100KHz
|
ALC OUTPUT
POWER STABILITY |
±3% |
SPURIOUS AND
HARMONIC EMISSIONS |
<80dBc
|
RF OUTPUT
IMPEDANCE |
50Ω |
RF INPUT POWER
CONNECTOR |
N |
RF SAMPLING
CONNECTOR |
BNC |
POWER SUPPLY
|
110-230Vac ±15%
50-60Hz |
OPERATION
TEMPERATURE RANGE |
0 to 40°C
recommended, -10 to 55°C max. |
RELATIVE
HUMIDITY |
Up to 95% without
condensation |
DIMENSIONS
|
484x300x90mm, 2
standard rack units of 19" |
WEIGHT
|
7Kg |