Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter

Cellflex Coax Kabel 1/2 LCF Zwart, Per 10 Meter - Coax Bekijk groter

: DMR-Electronics

: 07-0100-0010

: Nieuw

: Coax kabels

: Cellflex Coax Kabel 1/2 LCF zwart, per 10 meter

Cellflex Coax Kabel 1/2 LCF zwart is een robuuste, flexibele coaxkabel met lage demping, ontworpen voor hoogwaardige signaaloverdracht.

Deze kabel, verkocht per 10 meter, is perfect voor professionele toepassingen in telecommunicatie en RF-systemen, en biedt uitstekende prestaties in veeleisende omstandigheden.

Bij het kopen van dit product krijgt u in totaal 4 Loyaliteit punten. Uw winkelwagen bevat een totaal aan 4 Loyaliteit punten die omgezet kunnen worden in een waardebon van € 0,80.


€ 84,99

Aantal Korting U bespaart
2 2% Tot € 3,40
4 4% Tot € 13,60
6 6% Tot € 30,60
8 8% Tot € 54,39
10 10% Tot € 84,99

  • Korting op je Bestelling
  • Gratis verzenden tot 1 KG
  • Volume korting
  • Bonus systeem
  • Veilig betalen
  • Niet goed geld terug
  • Trustpilot
Productinformatie

Cellflex Coax Kabel 1/2 LCF zwart

Low Attenuation Cellflex Coax Kabel 
The low attenuation of CELLFLEX® coaxial cable results in highly efficient signal transfer
in your RF system.

Complete Shielding
The solid outer conductor of CELLFLEX® coaxial cable creates a continuous RFI/EMI shield
that minimizes system interference.

Low VSWR
Special low VSWR versions of CELLFLEX® coaxial cables contribute to low system noise.

Outstanding Intermodulation Performance
CELLFLEX® coaxial cables solid inner and outer conductors virtually eliminate intermods.
Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.

High Power Rating
Due to their low attenuation, outstanding heat transfer properties and temperature stabilized dielectric
materials, CELLFLEX® cable provides safe long term operating life at high transmit power levels.

Wide Range of Application
Typical areas of application are: feedlines for broadcast and terrestrial microwave antennas,
wireless cellular, PCS and ESMR base stations, cabling of antenna arrays,
and radio equipment interconnects.

 

Technical Facts:

Structure
Inner Conductor: Copper-Clad Aluminum Wire [ mm (in) ] 3.56 (0.14)
Dielectric: Foam Polyethylene [ mm (in) ] 9.3 (0.366)
Outer Conductor: Corrugated Copper [ mm (in) ] 12.3 (0.48)
Jacket: Polyethylene, PE [ mm (in) ] 13.75 (0.54)
Mechanical Properties
Weight, approximately [ kg/m (lb/ft) ] 0.17 (0.11)
Minimum bending radius, single bending [ mm (in) ]  
Minimum bending radius, repeated bending [ mm (in) ] 32 (1.3)
Bending moment [ Nm (lb-ft) ] 1.8 (1.33)
Max. tensile force [ N (lb) ] 650 (146)
Recommended / maximum clamp spacing [ m (ft) ] 0.30 / 0.30 (1.00 / 1.00)
Electrical Properties
Characteristic impedance [ Ω ] 50 +/- 1
Relative propagation velocity [ % ] 77
Capacitance [ pF/m (pF/ft) ] 86.0 (26.0)
Inductance [ µH/m (µH/ft) ] 0.215 (0.066)
Max. operating frequency [ GHz ] 10.6
Jacket spark test RMS [ V ] 5000
Peak power rating [ kW ] 24.0
RF Peak voltage rating [ V ] 1550
DC-resistance inner conductor [ Ω/km (Ω/1000ft) ] 2.9 (0.88)
DC-resistance outer conductor [ Ω/km (Ω/1000ft) ] 4.5 (1.37)
Recommended Temperature Range
Storage temperature [ °C (°F) ] -70 to +85 (-94 to +185)
Installation temperature [ °C (°F) ] -40 to +60 (-40 to +140)
Operation temperature [ °C (°F) ] -50 to +85 (-58 to +185)

 

**note: het aantal welke u selecteert is gelijk aan x 10 meter, ( aantal 2 = 20 meter, aantal 5 = 50 meter). 

U ontvangt de volledige lengte aan één stuk.