Geen producten
Prijzen zijn incl. btw
15W FM Zender DSP RDS package - met...
Monacor PA-4120D 4-channel class D PA power amplifier, 4 x 120 W
Monacor DMP-130MIXBT MP3 player and microphone line mixer. With this...
EDABv2+ DAB+ digital radio exciter board 175-225MHz
Attenuator 10dB 100W flange-mount
50 ohm 250W flange mount RF terminating resistor
The new SE+ V3 series brings significantly improved DSP software, V4...
The new SE+ V3 series brings significantly improved DSP software, V4...
The new SE+ V3 series brings significantly improved DSP software, V4...
Wat is Dante?
Dante is een complete oplossing voor media-netwerken en de de facto standaard voor digitale media-netwerken. Dante distribueert niet-gecomprimeerde, meerkanaals digitale media via standaard Ethernet-netwerken, met bijna nul latentie en perfecte synchronisatie.
Hoe werkt het?
In een Dante-apparaat neemt de hardware digitale audio en...
Wat is Dante?
Dante is een complete oplossing voor media-netwerken en de de facto standaard voor digitale media-netwerken. Dante distribueert niet-gecomprimeerde, meerkanaals digitale media via standaard Ethernet-netwerken, met bijna nul latentie en perfecte synchronisatie.
Hoe werkt het?
In een Dante-apparaat neemt de hardware digitale audio en 'packetiseert' het. Kort gezegd wordt de audio gesegmenteerd en verpakt in IP-pakketten (Internet Protocol) die geschikt zijn voor verzending via een Ethernet-netwerk. De pakketten bevatten timinginformatie en bron- en bestemmingsnetwerkadressen, waardoor ze efficiënt via het netwerk naar de juiste bestemming kunnen worden geleid.
Wanneer een apparaat Dante-audiopakketten ontvangt, reconstrueert het deze opnieuw in een continue digitale audiostream, die vervolgens wordt uitgespeeld, opgenomen of digitaal wordt verwerkt, afhankelijk van de rol van dat apparaat in het audiosysteem.
Hardware-Dante-apparaten ondersteunen uitzonderlijk lage latentie (in de orde van microseconden in plaats van milliseconden), en algemene toepassingen met lage latentie (bijvoorbeeld realtime monitoring tijdens opname) worden eenvoudig ondersteund.
Dante AVIO AES3 EBU adapter ADP-AES3-2X2 For connecting analogue devices with AES3 EBU interface to a Dante® audio networkFor connecting analogue devices with AES3/EBU interface to a Dante® audio network Impedance: 110 Ω (bal.) S/N ratio: > 135 dB Sampling rates: 44.1/48/96 kHz, 24 bits Connections: 1 x RJ45, 1 x XLR plug, 1 x XLR inline jack
Dante analogue input adapter ADP-DAI-1XO 1 channel For connecting analogue devices with AES3 EBU interface to a Dante® audio networkFor connecting analogue audio line level devices (e.g. mixer) to a Dante® audio network Adjustable signal level: +24/+4/0 dBu, 0/-10 dBV (via Dante® controller) Frequency range: 20-20,000 Hz Impedance: 20 kΩ (bal.), 10 kΩ...
Dante analogue output adapter 1 channel ADP-DAO-0X1 For connecting analogue devices with AES3 EBU interface to a Dante® audio networkFor connecting analogue audio line level devices (e.g. active speakers) to a Dante® audio network Adjustable signal level: +18/+4/0 dBu, 0/-10 dBV (via Dante® controller) Frequency range: 20-20,000 Hz Impedance: 150 kΩ...
Dante AVIO USB adapter ADP-USB-2X2 2-channel recording reproduction For connecting a computer to a Dante® audio networkFor connecting a computer to a Dante® audio network 2-channel recording/reproduction Sampling rate: 48 kHz Compatible with Windows, Mac OS, IOS and Android devices, no drivers required Connections: 1 x RJ45, 1 x USB Type-A
Dante™ I/O box, for converting analogue audio signals into Dante™ streams.2 x microphone/line input (XLR, bal.) 1 x aux input (3.5 mm stereo jack) 1 x Dante™ output (EtherCon/RJ45) 1 x monitor output (3.5 mm stereo jack) Gain adjustable via recessed potentiometer (0-60 dB)
Dante™ Receiver box, for converting Dante™ streams into analogue audio signals.1 x Dante™ input (EtherCon/RJ45) 1 x aux input (3.5 mm stereo jack) 2 x audio output (XLR, bal.) 1 x monitor output (3.5 mm stereo jack)
Dante audio adapter 2 channel ADP-DAI-2X0 For connecting analogue audio line level devices (e.g. mixer) to a Dante audio networkFor connecting analogue audio line level devices (e.g. mixer) to a Dante® audio network Adjustable signal level: +24/+4/0 dBu, 0/-10 dBV (via Dante® controller) Frequency range: 20-20,000 Hz Impedance: 20 kΩ (bal.), 10 kΩ...