100W FM ZENDER SOLID STATE EM 100 DIG PLUS OMB

    EM100 DIG P

          Nieuw

              The EM 100 DIG PLUS is a 100W FM transmitter made up with the most modern available technology so as to provide the maximum performance at minimal cost, while fully meeting the technical regulations. Flexibility, quality, compactness, and low electrical consumption make the EM 100 DIG PLUS one of the best offered on the market today. This transmitter can be supplied with an internal digital stereo generator board (60dB separation).

            Meer details

          Bij het kopen van dit product krijgt u in totaal 110 Loyaliteit punten. Uw winkelwagen bevat een totaal aan 110 Loyaliteit punten die omgezet kunnen worden in een waardebon van € 22,00.


                € 2.219,00

                Rabatt auf Ihre Bestellung   Korting op je Bestelling
                Gratis verzenden Gratis verzenden tot 10 KG
                Volume korting Volume korting
                Bonus systeem Bonus systeem
                Veilig betalen Veilig betalen
                Niet goed geld terug Niet goed geld terug
                QShops certificaat QShops certificaat
                Trustpilot Trustpilot

        Volumekorting

          Aantal Korting U bespaart
          2 2% Tot € 88,76
          4 4% Tot € 355,04
          6 6% Tot € 798,84
          8 8% Tot € 1.420,16
          10 10% Tot € 2.219,00

        Meer informatie 100W FM ZENDER SOLID STATE EM 100 DIG PLUS OMB

          Product Discription:

      MAIN ADVANTAGES OF THE EM 100 DIG PLUS FM TRANSMITTER MANUFACTURED BY OMB:

      • Super-compact size and reduced weight.
      • Low performance costs.
      • Robust modular construction.
      • Easy to use and to configure. The transceiver uses a control interface, which is equipped with a large LCD screen, a multifunction knob, and few buttons.
      • Nominal RF output power over the full FM range particularly stable against time.
      • Power section entirely modular and highly reliable.
      • RF output stage with reverse intermodulation figure lower than the standard bipolar construction.
      • Low level of dissipation.
      • Stable, reliable power supply.
      • Easy diagnosis and easy-to-read parameters.
      • Compliance with the strictest regulations.

       

       

       

      Technical specifications:


       

       

      RANGE 87.5-108MHz
      FM MODULATION 75KHz (adjustable) peak deviation. Mono 180kF3E and Stereo 256kF3E
      AUDIO/MPX INPUT LEVEL -3.5 to +12.5dBm @ 75KHz deviation
      AUDIO INPUT CONNECTORS XLR(F)
      AES/EBU DIGITAL INPUT CONNECTOR (OPTIONAL) XLR(F), 110Ω balanced
      SEPARATION BETWEEN CHANNELS (OPTIONAL STEREO GENERATOR) 60dB
      AUX. CHANNEL INPUT LEVEL (RDS/SCA) 7.5KHz deviation: -12.5 to 3.5dBm

      2KHz deviation: -24 to -8dBm

      AUX. CHANNEL INPUT IMPEDANCE 10KOhm
      MODULATION DISTORTION 7.5KHz deviation: <0.05%, 0.02% typical

      2KHz deviation: <0.2%, 0.05% typical

      MONO S/N RATIO 30 to 20000Hz: >76dB, 86dB typical

      CCIR: >75dB, 81dB typical

      STEREO S/N RATIO 30 to 20000Hz: >72dB, 77dB typical

      CCIR: >68dB, 72dB typical

      AUDIO CHANNELS BANDWIDTH 30 to 15000Hz ±0.1dB
      PRE-EMPHASIS TIME CONSTANT Selectable, 25/50/75 microseconds
      NOMINAL RF OUTPUT POWER 100W
      TRANSMITTER TUNING STEPS 10/100KHz
      OUTPUT POWER ALC STABILITY ±3%
      HARMONICS AND SPURIOUS EMISSIONS <80dBc
      RF OUTPUT IMPEDANCE 50Ω
      RF OUTPUT CONNECTOR N type
      RF SAMPLER CONNECTOR BNC type
      POWER SUPPLY Single phase 110-230Vac ±15% 50/60Hz
      OPERATING TEMPERATURE RANGE 0 to 40°C recommended, -10 to +55° max.
      RELATIVE HUMIDITY Up to 95% not condensed

       

       

      30 andere producten in categorie: FM Zenders