25W FM -Sender Festkörper EM 25 Dig plus OMB

    25W FM ZENDER SOLID STATE EM 25 DIG PLUS OMB Vergrößern

    25W FM -Sender Festkörper EM 25 Dig plus OMB

    EM 25 DIG P

    EM 25 Dig Plus ist ein 25 -W -FM -Sender, der mit der modernsten verfügbaren Technologie besteht, um die maximale Leistung zu minimalen Kosten zu bieten

    Achtung: Letzte verfügbare Teile!

    Sammeln Sie mit dem Kauf dieses Artikels bis zu 87 Treuepunkte. Ihr Warenkorb hat insgesamt 87 Treuepunkte die umgewandelt werden können in einen Gutschein im Wert von € 17,40.


    € 1.744,99

    Rabatt auf Ihre Bestellung Rabatt auf Ihre Bestellung
    Kostenloser Versand Kostenloser Versand in NL
    Volumenrabatt Volumenrabatt
    Bonus-System Bonus-System
    Sichere Zahlung Sichere Zahlung
    Geld-zurück-Garantie Geld-zurück-Garantie
    Trustpilot Trustpilot

    Mengenrabatt

    Menge Rabatt Sie sparen
    2 2% Bis zu € 69,80
    4 4% Bis zu € 279,20
    6 6% Bis zu € 628,20
    8 8% Bis zu € 1.116,79
    10 10% Bis zu € 1.744,99

    Mehr Infos 25W FM -Sender Festkörper EM 25 Dig plus OMB

    The EM 25 DIG PLUS is a 25W FM transmitter made up with the most modern available technology so as to provide the maximum performance at minimal cost, while fully meeting the technical regulations. Flexibility, quality, compactness, and low electrical consumption make the EM 25 DIG PLUS one of the best offered on the market today. This transmitter can be supplied with an internal digital stereo generator board (60dB separation).
     

    Product Discription:


    MAIN ADVANTAGES OF THE EM 5000 HE DIG PLUS FM TRANSMITTER MANUFACTURED BY OMB:

    • Super-compact size and reduced weight.
    • Low performance costs.
    • Robust modular construction.
    • Easy to use and to configure. The transceiver uses a control interface, which is equipped with a large LCD screen, a multifunction knob, and few buttons.
    • Nominal RF output power over the full FM range particularly stable against time.
    • Power section entirely modular and highly reliable.
    • RF output stage with reverse intermodulation figure lower than the standard bipolar construction.
    • Low level of dissipation.
    • Stable, reliable power supply.
    • Easy diagnosis and easy-to-read parameters.
    • Compliance with the strictest regulations.

     

     

     

    Technical specifications:


    FREQUENCY RANGE 87.5-108MHz
    FM MODULATION 75KHz (adjustable) peak deviation. Mono 180kF3E and Stereo 256kF3E
    AUDIO/MPX INPUT LEVEL -3.5 to +12.5dBm @ 75KHz deviation
    AUDIO INPUT CONNECTORS XLR(F)
    AES/EBU DIGITAL INPUT CONNECTOR (OPTIONAL) XLR(F), 110Ω balanced
    SEPARATION BETWEEN CHANNELS (OPTIONAL STEREO GENERATOR) 60dB
    AUX. CHANNEL INPUT LEVEL (RDS/SCA) 7.5KHz deviation: -12.5 to 3.5dBm

    2KHz deviation: -24 to -8dBm

    AUX. CHANNEL INPUT IMPEDANCE 10KOhm
    MODULATION DISTORTION 7.5KHz deviation: <0.05%, 0.02% typical

    2KHz deviation: <0.2%, 0.05% typical

    MONO S/N RATIO 30 to 20000Hz: >76dB, 86dB typical

    CCIR: >75dB, 81dB typical

    STEREO S/N RATIO 30 to 20000Hz: >72dB, 77dB typical

    CCIR: >68dB, 72dB typical

    AUDIO CHANNELS BANDWIDTH 30 to 15000Hz ±0.1dB
    PRE-EMPHASIS TIME CONSTANT Selectable, 25/50/75 microseconds
    NOMINAL RF OUTPUT POWER 25W
    TRANSMITTER TUNING STEPS 10/100KHz
    OUTPUT POWER ALC STABILITY ±3%
    HARMONICS AND SPURIOUS EMISSIONS <80dBc
    RF OUTPUT IMPEDANCE 50Ω
    RF OUTPUT CONNECTOR N type
    RF SAMPLER CONNECTOR BNC type
    POWER SUPPLY Single phase 110-230Vac ±15% 50/60Hz
    OPERATING TEMPERATURE RANGE 0 to 40°C recommended, -10 to +55° max.
    RELATIVE HUMIDITY Up to 95% not condensed