Prices are tax included
LED pin base lamp, G4, 12 V DC current /1.2 W As a replacement for low-voltage halogen lamps with pin base
LED controller, for controlling up to 2 unicoloured LED strips. Wireless remote control CU-10T is required for operation Carrier frequency: 868 MHz Easy assignment of the controllers via learn button
Wireless remote control, for controlling unicoloured LED strips. LED controller CU-10R is required for operation 5 selection buttons for individual controllers/zones Multiple controllers possible in one zone Transmission frequency: 868 MHz Brightness control On/off button
LED switch-mode PSU, for indoors and outdoors (IP67). Especially for LED installations Due to automatic digital switching, suitable for small loads, e.g. ideally suited for individual LED strips Low-noise acc. to EMC standard EN 61000-3-2 class C Active PFC filter Protected against short circuit, overload, overheating and overvoltage Connection via bare...
3-channel wireless LED controller CU-3BT For controlling RGB LED strips Protected against short circuit, overheating and overload Control possible via Bluetooth using an app for iOS or Android or via radio remote control CU-1BTT or CU-2BTT Free app available from the App Store Operating range: 15 m
Hand-held radio remote control CU-2BTT Wireless LED controller CU-1BT, CU-3BT or CU-4BT is required for operation Multi-function button Transmission frequency: 433.92 MHz Operating range: 15 m