Suono TSL Aural FM 1500 2500 MHz Broadcast audio wireless link
View larger
Brand: Suono
Model: TSL-RAL-FM
Stands: New
Categories: FM Studio Link Radial connection
12 other products in category - FM Studio Link Radial connection
- STL Yagi antenne set + 5m coaxial kabel
- Sirio Colinear dipole array SO 4G LTE
- STLMAX Wireless STL Link 10W/20W VHF UHF
- FLY-16T 16-channel wireless PA audio transmitter
- CyberMaxLink8000 10W TX/RX PSU Studio to Transmitter audio link
- CyberMaxLink 8000 20W TX/RX PSU Studio to Transmitter audio link
- TSG RAG FM 200~960 MHz Broadcast audio wireless link
- Colinear dipole array SO 4G LTE
- RAG Re-Broadcast Receiver
- FLY-16-R 16-channel wireless PA audio receiver
- Log Antenna for radio links 698-2700 Mhz
- MT/MR PLATINUM - Professional Studio to Transmitter Link (STL)
Product information
Product Discription:
Transmit your program, events, parties and much more with the new Suono TSL Aural
The 1.5-2.5GHz link series is a complete system for those who need to transmit audio from studio to the remotely located transmitter (usually mountain top). The Hi-Fi VCO present in the link guarantees an incredible audio quality - punch and clarity. The system can be connected to 110/220V AC line. Transmitter is equipped with XLR audio inputs, 2 MPX inputs (MPX and SCA) and 19KHz pilot sync output for RDS encoders. Transmitters offer up to 5W of clean adjustable power. Receivers have MPX output and 3 XLR connectors (1x mono output + left/right channel). They are equipped with 2 cavity filters with high gain RF cells.
Technical Facts:
Transmitter:
- Frequency Range: 1500~2500 MHz -20MHz sub-band
- Type of Modulation FM Class F3
- VCO Tuning 25 MHz
- Frequency Stability ± 2,5ppm (Bettr 0n request)
- Synthesizer Step 25KHz
- Power Output 1 or 5 Watts
- Spurious Emission < -80 dB or better
- Harmonic Emission < -65 dB (-80 dB on request)
- Stereo Separation > 55 dB @ 1 KHz
- Distorsion < 0.2% (TYP 00.8 %) @ 1KHz)
- Base Band 30 Hz - 60 KHz within 0.15 dB
- Unweighted S/N Ratio > 72 dB rms at 30 Hz ~ 20 KHz
- Enphasis 50 or 75 μS - selectable
- RF Connectors N-F 50 ohm
- Input Base Band Imp. 2 Kohm
- Input Mono Impedence 600 Ohm
- Cooling Forced air
- OP. Temperature Range 0 ÷ +45°C
- Maximum Umidity 90%
- AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
- Dimension 1 Units Rack 19" 44 cm Depth
- Weight 6.8 Kg
Receiver:
- Frequency Ranges 1500~2500 MHz - 20MHz sub-band
- Type of Modulation FM Class F3
- VCO Tuning 25 MHz
- Frequency Stability ± 2.5 ppm (Better on request)
- Synthesizer Step 25KHz
- Image Rejection 60dB Typ.
- RN Noise Figure 6dB or lower
- Stereo Separation > 45 dB @ 1 KHx
- Distorsion < 0.5% (TYP 0.2 % @ 1KHz)
- Base Band 30 Hz - 60 KHz within 0.08 dB
- S/N Ratio > 72 dB with 0.2 mV input (Typ 78 dB)
- Deenphasis 50 or 75 μS int. selectable
- RF Connectors N-F 50 ohm
- B. Band-IF Conn. BNC-F
- Base-Band Imp. < 30 ohm
- Cooling Forced air
- P. Temp. Range 0 ÷ +45°C
- Maximum Umidity 90%
- AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
- Dimension 1 Units Rack 19" 44 cm Depth
- Weight 6.2 Kg
Note:
When ordering specify required frequency band (write that under comments).
At this time links cover 1500-2500MHz. For example 1500-1520MHz.
Exact frequency inside this 20MHz segment can be selected via LCD display.