OMB 5KW FM Transmitter, HIGH EFFICIENCY 5KW FM ZENDER EM 5000 HE DIGiTAL
View larger
Brand: OMB
Model: EM 5000-DIG
Stands: New
Categories: FM Transmitters
The 5KW FM transmitter, EM 5000 HE DIG PLUS, has been created by the OMB center of development for high efficiency transmitters. It consists on the high efficiency 5KW amplifier, FMA 5000 HE, with 72% efficiency and the EM 25 DIG PLUS, a 25W FM transmitter. The high efficiency 5KW amplifier has an approximate consumption of 6600VA at 230Vac, so it pays for itself in a short period of time due to its low consumption. This 5KW FM transmitter is also available in Dual Drive version
25 other products in category - FM Transmitters
- TEM 10 W FM Transmitter in 1 unit 19inch rack MPX input
- 500 W FM Transmitter in 1 unit 19inch rack MPX input
- ESVA 100 FM Transmitter
- CYBERMAXFM+ SE V3 800W FM transmitter with DSP and RDS
- ESVA 250 FM Transmitter
- EM 25 DIG PLUS – 25W Solid State FM Transmitter (Compact & Digital)
- ESVA 50 FM Transmitter
- 2KW FM Transmitter, EM 2000 HE DIG PLUS OMB
- EM 100 DIG PLUS - Professional 100W FM Transmitter
- ESVA 20 FM Transmitter
- ESVA 500 Fm Transmitter
- CyberNano FM Transmitter LPFM 100mW – Micro Box
- High-End FM-Transmitter DDS 15W 50W 100W
- CYBERMAXFM+ SE V3 300W FM transmitter with DSP and RDS
- USB+ IO board
- TEM 50 W FM Transmitter in 1 unit 19inch rack MPX input
- ESVA 1000 1KW FM Transmitter
- EM 1000W FM Transmitter HE DIG PLUS COMPACT OMB FM
- 100 W FM Transmitter in 1 unit 19inch rack MPX input
- OMB High efficient 1000W (1KW) FM Transmitter
- CYBERMAXFM+ SE V3 500W FM transmitter with DSP and RDS
- EM 250 DIG PLUS COMPACT – 250W Solid State FM Transmitter
- 1000 W FM Transmitter in 3 unit 19inch rack MPX input
- TEM 300 W FM Transmitter in 1 unit 19inch rack MPX input
- CYBERMAXFM+ SE V3 200W FM transmitter with DSP and RDS
Product information
MAIN ADVANTAGES OF THE EM 5000 HE DIG PLUS FM TRANSMITTER MANUFACTURED BY OMB:
- AC Efficiency: 72% (typical value). RF Efficiency RF: 84% (typical value)
- 6 amplifying modules of 1000W with MOSFET technology
- 3 independent switching power supplies connected in parallel so if there is a failure in any of them the equipment maintains its operation
- TFT screen and touch keyboard for the control and visualization of operational parameters.
- Memory registration of events
- Control of the speed of cooling fans depending on the temperature at the power modules for optimizing power consumption and decreasing acoustic contamination
- Advanced protection against load mismatches without interrupting the transmission and ultra-fast protection in case of excessive reflected power and input power
- Analog telemetry, digital RS232 remote control and telemetry, remote control by opened/closed contacts
- Low pass filter, EMI filters and internal single-phase transient suppressor
- Automatic power reduction at night if the amplifier is combined with the EM 25 DIG PLUS
- Automatic power reduction in case of high temperature, the equipment returns automatically to its rated power value when the temperature reaches back an average value
- Automatic power reduction in case of failure of one of the power supplies and in case of excessive reflected power.
- Automatic voltage control for efficiency optimization
| AMPLIFIER FMA 5000 HE | |
| FREQUENCY RANGE | 87.5-108MHz |
| INPUT RETURN LOSS | -20dB |
| INPUT POWER | <25W |
| OUTPUT POWER | 5KW nominal, manual and automatic adjustable |
| POWER GAIN | >21.3dB minimum |
| TOTAL EFFICIENCY | >73% typical |
| RF EFFICIENCY | 84% typical |
| COOLING | Forced air, speed control of fans |
| HARMONICS LEVEL | <-82dBc |
| INPUT/OUTPUT IMPEDANCE | 50Ω |
| RF INPUT CONNECTOR | N(F) |
| RF OUTPUT CONNECTOR | EIA 7/8" or EIA 1+5/8" (under request) |
| RF MONITOR CONNECTOR | BNC(F) |
| POWER SUPPLY | 230VAC single phase, 230-380VAC three phase |
| CONSUMPTION | 6600VA (@5000W output power) |
| PROTECTIONS | Reflected power, forward power, overdrive, and overcurrent in power modules. Smart temperature protection. Ultra-fast protection against reflected and input power. Real time registration of events. Exciters inhibition |
| TELEMETRY AND REMOTE CONTROL | Analog telemetry (direct and reflected power measurements). Digital telemetry and remote control RS232. Remote control by opened/closed contacts |
| OPERATION TEMPERATURE | -5 to +40°C |
| WEIGHT | 55Kg approx. (without rack) |
| DIMENSIONS | 5 standard rack units of 19" (height), 850mm (depth) |
| EXCITER EM 25 DIG PLUS |
|
| FREQUENCY RANGE | 87.5-108MHz |
| FM MODULATION | 75KHz (adjustable) peak deviation. Mono 180kF3E and Stereo 256kF3E |
| AUDIO/MPX INPUT LEVEL | -3.5 @ +12.5dBm @ 75KHz deviation |
| AUDIO INPUT CONNECTORS | XLR(F) |
| AUXILIARY CHANNEL (RDS/SCA) INPUT LEVEL | 7.5KHz deviation: -12.5 to 3.5dBm and 2KHz deviation: -24 to -8dBm |
| AUX. CHANNEL INPUT IMPEDANCE | 10kOhm |
| MODULATION DISTORTION | 7.5Khz deviation: <0.05%, 0.02% typical; 2KHz deviation: <0.2%, 0.05% typical |
| S/N MONO RATIO | 30 to 20000Hz: >76dB, 86dB typical, CCIR: >75dB, 81dB typical |
Technical specifications:
| S/N STEREO RATIO | 30 to 20000Hz: >72dB, 77dB typical, CCIR: >68dB, 72dB typical |
| AUDIO CHANNELS BANDWIDTH | 30 to 15000Hz ±0.1dB |
| PRE-EMPHASIS TIME CONSTANT | Selectable, 25/50/75 microseconds |
| RF NOMINAL OUTPUT POWER | 25W |
| TUNING STEPS OF TRANSMITTER | 10/100KHz |
| ALC OUTPUT POWER STABILITY | ±3% |
| SPURIOUS AND HARMONIC EMISSIONS | <80dBc |
| RF OUTPUT IMPEDANCE | 50Ω |
| RF INPUT POWER CONNECTOR | N |
| RF SAMPLING CONNECTOR | BNC |
| POWER SUPPLY | 110-230Vac ±15% 50-60Hz |
| OPERATION TEMPERATURE RANGE | 0 to 40°C recommended, -10 to 55°C max. |
| RELATIVE HUMIDITY | Up to 95% without condensation |
| DIMENSIONS | 484x300x90mm, 2 standard rack units of 19" |
| WEIGHT | 7Kg |